Sam's Blog: How to Make a Blade Sheath from Plastic Straws

How to Make a Blade Sheath from Plastic Straws: "

This article explains how to make a neat cover or blade sheath for pliers, scissors, or similar long and sharp objects that have blades in need of covering to prevent accidental poking or injury. This blade sheath is simple to make using four plastic drinking straws; it can be made by interweaving different colors or can be made plainer for the more experienced craftsperson. One of the excellent features of using a plastic straw is its stretchability which ensures that the blade sheath can expand and contract slightly to cover the size of the pliers or other tool being sheathed. Here is how to make it.

Steps

Flatten the straw between a finger and thumb, as shown in the image.
- Cut down the middle of the flattened straw, lengthwise.
- Leave the last 5mm (0.19') uncut, as shown in the image.
Repeat the cutting process on the same straw three times. Cut the remaining three lengths at even distances between each former cut length.
- This is how the end result will appear.
Create three more straws in the same fashion. Use a differently colored straw for each of the four straws.
Weave the first two straw colors together. Follow exactly the method shown in the image.
Weave the other two colors the same way. Be sure to push down the woven pieces to make the two straws sit flush at the point that the arrow is showing.
Turn the straws to their 'inner' side. Hold them together as shown in the image.
Use spring clips to hold the two pieces in place together.
Begin weaving the yellow straw from one piece with the blue straw from the other piece. At this stage, you are now joining both pieces together to start forming the blade sheath.
- This is how the weaving will start to appear.
Hold the weaving together using another clip. This will prevent your efforts from unraveling as you continue weaving the next part.
Weave the red straw from one side and the orange straw from the other side. Do this in exactly the same manner as the previous weaving of the yellow and blue straws.
Continue weaving the colors together. Keep everything slanted at a right angle as you weave (as shown in the images).
- Keep the clips in place so that the sheath stays intact as you work on it.
Continue weaving until you reach the 'top' of the sheath.
- Hold the end together using another clip.
Use pliers or scissors to cut off the excess pieces that cannot be woven into the sheath.
- Cut as closely as possible to ensure a neat finish.
Use a lighter to gently seal the end in place. Do this with great care; you don't want to melt your work.
- The finished neat end, sealed off.
Remove the clips from the other end of the sheath. Cut the corner roundly.
This is the finished sheath.
- Alongside the pliers (see the length works well).
- With pliers inserted.

Tips

Scissors sack
When making this sheath for the first time, use four colors to make it easier to learn and to see where you're weaving the pieces. When you have mastered this, it's also possible using just one color, as shown by this scissors sheath.

Warnings

Take care when cutting to avoid cutting fingers.
Be super careful when using the lighter to avoid burning your fingers or melting the rest of your work.
A plastic straw can break when cold. It would be easiest to make this in a warm room.